Stage Lights Controller Sunny 512 DMX Lighting Console 512 Channels
Model: R-DC512 Sunny 512 DMX Console
DMX512/1990 standard 512 DMX control channels.
4 output with separate optical isolated
Up to 32 scanners may be connected with a maximum of 16 channels
A large back light LCD to display operation parameters
16 channel faders plus 1 speed and 1 cross control fade.
1600 chase steps maximum. 48 chases - up to 99 steps each. Speed
and cross time of each step can be set separately
by music active or manual mode.
The time range of both SPEED fade and CROSS fade is 0.01s-25.5s and
the total time amount of current status will be program step time
48 scenes can be used directly.
8 chases and 48 scenes can run at the same time. And 32 scanners
can be selected together
The X/Y channels of different fixtures can be controlled by
PAN/TILT wheel together.
16 Bit control for PAN/TILT fine adjustment.
15 environment programs to output the combination, which are
composed of different scenes, chases and manual output quickly
The music trigger source can be selected between audio line input
or internal microphone.
Easy to learn and operate.
The Data auto-saves. (Through the electronic memory storage and it
can be changed freely)
High performance switching power supply, with extremely low power
harmonious distortion and wide range of voltage, suit for the
different country simultaneously.
LED lamp connector
Power input: DC9V 1000mA
Dimension: 498 × 420 × 115mm
Net Weight: 6.5kg
During program running, the program will run in preset speed when
SPEED & CROSS faders at AUTO position otherwise the running
will be total amount of current SPEED & CROSS faders
When run Chase and environment program, press CROSS ode button to
change CROSS mode between all channel mode or only X/Y mode
After set PAN/TILT wheel, the faders and PAN/TILT wheel could
control same channel value together (faders change channel value
wheel fine adjust value)